[root] Mobile ODIN Pro v3.85 Apk
[root] Mobile ODIN Pro v3.85 Apk free Download. Mobile ODIN
is the on-device firmware flasher of choice. Just throw those firmware files on
your (internal or external) SD card, start Mobile ODIN and flash away. Your
device must be rooted to be able to use Mobile ODIN. Check the list below to
see if your device is supported! If you use the EverRoot option, Mobile ODIN
will root the firmware while you flash it. Checking out that new leaked
firmware? No reason to lose root!
App Specification:
- CATEGORY: Tools
- VERSION: 3.85
- SIZE: 2.5M
- REQUIREMENTS: 2.1 and up
MANUAL:
Flashing with Mobile ODIN is easy. You start by starting the
app and the app will check your system has everything it needs to continue
(like root). It may need to download an additional package, so it is advised
you have Wi-Fi available.
Now you should see the main Mobile ODIN screen. It will list
a set of partitions. Clicking a partition will allow you to select a file from
your SD card to flash to that partition. Do not worry about selecting the wrong
file - Mobile ODIN will not let you. Separate files (named after the partition)
as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you may be used to "PDA",
"PHONE", and "CSC" buttons. All three of these buttons have
been replaced by the "Open file ..." button. This button will open
the file you select from the SD card, and find all the partitions it can flash
inside that file. So if you select a .tar file containing kernel and modem, the
Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have
the Pro version you can proceed to the EverRoot section. The EverRoot options
allows you to root your firmware while it is being flashed. Never again will
you be without root! Select here which apps you want to inject in the firmware
that is being flashed.
Now that we are all done selecting partitions and
configuring EverRoot, we continue to "Flash firmware". Mobile ODIN
will gather all the information it needs and perform the flash. Before
starting, however, it will check that your battery level is over 50%, and if
applicable offer to verify MD5 checksums on the files you have selected to
flash. If all is well, it will reboot into recovery mode, and flash the
firmware you have selected.
Currently supported devices:
Samsung Galaxy S:
- GT-I9000/B/M
- GT-I9003/L
- AT&T/Rogers Captivate SGH-I896/I897
Samsung Galaxy S2:
- GT-I9100/T/G/M
- SHW-M250S/K
- SC-02C
- AT&T SGH-I777
- Sprint/Virgin/Boost Epic 4G Touch SPH-D710/VMUB/BST
- USCC SCH-R760
Samsung Galaxy S3:
- GT-I9300/T
- GT-I9308
- LTE SHV-E210S
- LTE GT-I9305/T/N
- AT&T/Canadia SGH-I747/M
- TMOUS SGH-T999
- Sprint/C-Spire SPH/SCH-L710
- VZW SCH-I535 (unlock bootloader !)
- USCC/Cricket/MetroPCS Galaxy S3 SCH-R530/U/M/C
Samsung Galaxy S4:
- LTE GT-I9505
- Sprint SPH-L720
- TMOUS SGH-M919
- USCC SCH-R970
- Canadia SGH-I337M
Google Galaxy Nexus:
- GSM Maguro/Yakju/GT-I9250
- CDMA/LTE Toro/Mysid/SCH-I515 (no cdma radio flashing)
Samsung Galaxy Note
- GT-N7000/B
- GT-I9220
Samsung Galaxy Note 2:
- GT-N7100
- LTE GT-N7105
- AT&T/Canadia SGH-I317/M
- TMOUS SGH-T889
- Sprint SPH-L900
- VZW SCH-I605 (unlock bootloader !)
- USCC SCH-R950
Samsung Galaxy Note 3:
- SM-N9005
Samsung Galaxy Note 8.0":
- 3G GT-N5100
- Wi-Fi GT-N5110/N5113
- LTE GT-N5120
Samsung Galaxy Note 10.1":
- 3G GT-N8000
- Wi-Fi GT-N8010/N8013
- LTE GT-N8020
Samsung Galaxy Tab:
- Tab 7" GT-P1000
- Tab 7.0 Plus GT-P6200/L, GT-P6210
- Tab 7.7" GT-P6800, GT-P6810
- Tab 10.1" GT-P7500, GT-P7510
- Tab 2 7" GT-P3100, GT-P3110, GT-P3113
- Tab 2 10" GT-P5100, GT-P5110, GT-P5113
Samsung Galaxy 5:
- GT-I5500/B/L/T/M
- GT-I5503/T
- GT-I5508
Download server1
Download server2
0 comments:
Post a Comment